SoarskyRC Flysky FGr4S V2 Receiver, 2.4GHz 4CH AFHDS 3 Receiver
SoarskyRC Flysky FGr4S V2 Receiver, 2.4GHz 4CH AFHDS 3 Receiver
Thank you for participating in our Black Friday sale! Due to higher than expected order volumes, we may experience some delivery delays. But we promise that your patience will be well rewarded as we work hard to ensure that every order is delivered safely and quickly.
Shipping to
Estimated delivery on
- Complete after-sales technical support
Hot-selling Rroduct Recommendations
64 in stock
Receiver Overview
-
To ensure a strong signal make sure that the receiver is mounted with its antenna vertical.
Mini Receiver
-
Ultra-small size and ultra-light weight, effectively saving space and reducing the load of items.
-
Dimensions: About 26 * 22 * 17.3 mm, Weight: About 5.1g
Receiver Appearance
Binding & Forced Update & Failsafe
Binding
To ensure good signal strength, make sure the receiver antenna is as far away from any metal parts when installing the receiver.
1. Insert the binding cable into the receiver's BIND port. 2. Plug the power cable into any other port, and the receiver's LED will start to flash quickly indicating that it has entered bind mode. 3. Put the transmitter into bind mode; (See the transmitter's instruction manual for more information.) 4. Binding is successful when the receiver's LED starts to flash slowly. Remove the power and bind cables from the receiver. If the transmitter is bidirectional the reciever status indicator will not fash slowly. 5. Reconnect the power cable to the receiver. 6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again.
Forced Update
After the transmitter is updated, if the code cannot be matched with the receiver, it is necessary to update the receiver. 1. Short circuit bind and its separated signal pins with bind cable;(It has been signed in the Receiver overview part) 2. Power on the receiver to enter the update mode(LED light of the receiver changes from 3 flash and 1 off), unplug the bind cable, and select forced update at the transmitter. 3. The LED light of the receiver changes from 3 flash and 1 off to slow flash, the update is completed.
Failsafe
The failsafe function is used to output the channel according to the out-of-control protection value after the receiver loses its signal and is out of control to protect the model and personnel.
• If the transmitter has not set the output of the failsafe channel value, after the receiver enters the out-of-control state, PWM, PPM, i-bus will not output, and the S.BUS will keep the last output; if the transmitter is set with the failsafe, follow the transmitter channel setting value Output.
Transmitter and Receiver Pairing Table
Attention
- Make sure the product is installed and calibrated correctly, failure to do so may result in serious injury.
- Make sure the receiver's battery is disconnected before turning off the transmitter, failure to do so may lead to unintended operation or loss of control.
- Make sure the receiver is mounted away from motors, electronic speed controllers or any device that emits excessive electrical noise.
- Do not power on the receiver during the setup process to prevent loss of control.
Built-in Single Antenna PWM/PPM/I-Bus Output Compatible with Flysky Noble FS-NB4 PL18 RC Transmitter for RC Car Boat
Remote control receiver
Product Model: FGr4S
PWM channel: 4
Wireless frequency: 2.4GHz
Wireless protocol: AFHDS 3
Range:> 200m (ground)
Antenna type: Built-in single antenna
Power: 3.5-8.4V
RSSI: Supported
Data port: PWM / PPM / i.bus / s.bus
Temperature range: -10 ℃ — + 60 ℃
Humidity range: 20% -95%
Online Update: Yes
Dimensions: 25.5 * 22 * 17.3 mm
Weight: 5.1g
Certification: CE, MIC, RCM, FCC ID: N4ZFGRS400
Let customers speak for us
from 65 reviewsVery quick service. Thank you!
Hello I want thank Soarsky for sending my nb4 barttery order 1750 . Finally received , this company is great and really do care about its customer. I want to correct my pass review and thanks you
Easy replacement process to get radio up and running went you have an accident.
Fitment was good. Stuck well. Would buy again.
Just arrived and was shipped quickly. Can't wait to set it up and start using it. Packaged well with all parts. Will definitely purchase again.
Site de très bonne qualité
2 semaines seulement pour recevoir la commande en France !
Parfait rien à dire de négatif
nice battery
I have resitly upgraded my radio to a NB4+ and I spent good money on it and I started thinking maybe I should get a case for it to keep it nice as I can, though I've never had a case before it was time to start so I ordered Soarsky case and I must say this was the perfect case for my radio has a storage pocket on the inside lid to keep stuff a couple extra slot for things and some extra room, I'm very happy with this purchase, and I do recomened this case for yor Noble remote.
it showed up fast, works as advertised
I got what I wanted at a good price and fast delivery. It arrived 2 days before estimate date.
John G
Just what I was looking g for. Excellent
Looks amazing and would definitely buy again, wish the gaps were tighter so the sticker looks more like it’s one piece, definitely recommend having a heat gun or a hair dryer with you as the stickers didn’t wanna stick overly well. Bottom of the external battery sticker isn’t the best as the holes for the rubber strips weren’t big enough
Fast shipping and case is exactly what I needed to protect my Flysky…had to do a little altering for the handle.
Good quality frame. Got the yellow which is more of a gold/orange colour which i like. I haven’t installed it yet, but i’m very happy with it.
Great product, easy to apply. Only suggestion I have would be to add a picture of where each sticker is to be applied. Some may have a hard time figuring out where some of the smaller stickers go.