Power HD GTS-2 Low Profile Brushless RC Servo | 23KG
Low stock
In stock, ready to ship
Pay Secure
Tech Suppoort
Most orders are shipped within 48 hours
Shipping calculated at checkout. Shipping policy
Frequently Asked Questions
What makes the GTS-2 a super low profile servo - how does it fit in tight chassis?
The GTS-2 measures only 23.6mm in height, which is 3mm shorter than standard short-body servos. This ultra-low profile design is specifically engineered for 1/10 scale racing chassis where servo bay clearance is critical, such as electric buggies and touring cars. The reduced height allows for lower center of gravity and better chassis flex without servo interference.
What is the difference between the Standard 180mm wire and 60mm wire versions?
Both versions are identical in performance and specifications. The difference is the servo lead wire length. The Standard version has a 180mm wire for conventional receiver placement. The 60mm short wire version uses reverse wiring optimized for specific chassis layouts where the receiver is mounted close to the servo, reducing cable clutter and weight. Choose based on your chassis layout and receiver position.
What are TC4 Titanium gears and why are they better than steel?
TC4 is a high-grade titanium alloy (Ti-6Al-4V) used in aerospace and motorsport applications. Compared to standard steel gears, TC4 titanium gears are approximately 4.5g lighter and 50% harder and tougher, providing superior wear resistance and impact strength. The weight saving directly reduces rotating mass, contributing to faster servo response and lower overall chassis weight - critical advantages in competitive 1/10 scale racing.
Does the GTS-2 support i-BUS2 for real-time parameter adjustment?
Yes. The GTS-2 supports Flysky i-BUS2 protocol, enabling remote parameter adjustment (stiffness, speed, deadband, center point, direction) and real-time temperature monitoring via compatible Flysky transmitters (NB4+ and NB4 Pro+). It also supports high-speed modes from Noble NB4 Pro (NOR/SR/SFR), Futaba (NOR/SR/UR), and SANWA (NOR/SHR/SSR/SUR/SXR), as well as the Power HD PG-CB63 programming card.
What voltage should I run the GTS-2 at for best performance?
The GTS-2 operates on 6.0V to 8.4V DC. For maximum performance in competitive racing, running at 8.4V (2S LiHV) delivers 23.0 kg-cm of torque at 0.065 sec/60 degrees - the fastest and most powerful configuration. At 7.4V (2S LiPo) you get 18.0 kg-cm at 0.073 sec/60 degrees, which is the most common racing setup. Do not exceed 8.4V to avoid damaging the servo.
What's in the Box
- 1x Power HD GTS-2 Low Profile Brushless Servo (Standard 180mm wire or 60mm wire depending on selected variant)
- 1x Servo Horn Set
- 1x Mounting Screws
- 1x User Manual / Specification Sheet
Let customers speak for us
Description
Championship-grade steering developed with professional drivers and world champions. The Power HD GTS-2 is a 47g super-low-profile brushless digital servo built for competitive RC chassis where response, weight and installation height all matter. At 8.4V it delivers up to 23.0kg-cm torque with 0.065 sec/60° speed, while its 23.6mm body height helps free up space in tightly packaged racing builds.
Key Features
✅ World-champion-developed racing design — Developed with professional drivers and world champions for championship-level competitive RC steering.
✅ Super-low-profile fit — 41.0 × 20.0 × 23.6mm dimensions suit chassis with limited servo clearance.
✅ High-voltage performance — Up to 23.0kg-cm torque and 0.065 sec/60° speed at 8.4V.
✅ Lightweight racing build — 47g weight helps keep competitive RC setups lean.
✅ Brushless drive system — A 4-pole brushless motor provides responsive digital control across 6.0–8.4V.
✅ Durable gear train — TC4 titanium and 7075 aluminum gears balance strength and low rotating mass.
✅ Two lead-length options — Choose the 180mm standard lead or 60mm short lead to match receiver placement.
Compatibility & Version Choice
Recommended for 1/10 electric buggy, 1/10 nitro touring car, 1/8 GP racing and other competitive RC applications that accept a 41.0 × 20.0 × 23.6mm servo. Measure the servo bay and confirm operating voltage before ordering.
Technical Specifications
Source: Power HD official specifications.
- Torque: 15.0kg-cm at 6.0V; 18.0kg-cm at 7.4V; 23.0kg-cm at 8.4V
- Speed: 0.080 sec/60° at 6.0V; 0.073 sec/60° at 7.4V; 0.065 sec/60° at 8.4V
- Operating voltage: 6.0–8.4V DC
- Stall current: 3.6A
- Weight: 47g
- Dimensions: 41.0 × 20.0 × 23.6mm
- Motor: 4-pole brushless
- Gears: TC4 titanium + 7075 aluminum
- Bearings: Dual ball bearing
- Frequency: 1520μs / 50–1666Hz
- Operating temperature: −10°C to 60°C
Installation Notes
Related Products
- Power HD GTS-2 Servo Combo
- Power HD PG-CB63 Programming Card
- Power HD GTS Series HV Brushless Servos
Choose the lead length that matches your chassis, confirm the voltage, and give your racing build faster, cleaner steering control.
Shipping Info
🏭 Fulfillment Warehouses
SoarSky operates warehouses in the US, Europe, and China. Orders are fulfilled from the nearest local warehouse. If local stock is unavailable, your order will ship from our China warehouse and international shipping times will apply.
💰 Shipping Rates
| Type | Condition | Cost |
|---|---|---|
| Free Shipping | Orders over $100 | Free |
| Standard Shipping | Orders under $100 | Based on weight & address |
| International Shipping | All international orders | Based on destination & weight |
⏱️ Dispatch & Delivery Times
| Region | Estimated Delivery |
|---|---|
| Domestic (US) | 5–10 business days |
| International | 10–15 business days |
* Customs processing may affect international delivery times.
🚫 Shipping Restrictions
Some remote areas may experience longer delivery times or limited shipping options. We will notify you if any issues arise.
📦 Order Tracking
Once your order ships, you will receive a confirmation email with a tracking number. Track your shipment via:
| Platform | Link |
|---|---|
| 17Track | www.17track.net |
| SoarSky Order Tracker | soarskyrc.com/pages/track-order-1 |
📬 Contact Us
If you encounter any issues such as damaged items or lost packages, please contact our customer service team as soon as possible and we will work to resolve it promptly.