HobbyWing XERUN XR10 Justock G3S 60A combo Suitable for 1/10 RC Drift Cars
HobbyWing XERUN XR10 Justock G3S 60A combo Suitable for 1/10 RC Drift Cars
Shipping to
Estimated delivery on
- Complete after-sales technical support
Hot-selling Rroduct Recommendations
20 in stock
Combo Overview:
The Hobbywing XR10 Justock G3SS Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 motor is an ideal stock motor for both 1/10 and 1/12 on and off-road racing. These two components paired together make for an ideal choice for beginners and experts alike.
Note: This product photo may not fully depict the described item. For comprehensive details on the listed product, please refer to the specifications provided.
Features:
- ESC:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Wireless module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- ESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through corners
- Built-in data logging for post-run reports
- Motor:
- Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
- Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
- Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
- Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
- The motor design is in compliance with IFMAR, and ROAR specifications
Specifications:
- ESC:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater,3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- ROAR Approval: Yes
- Motor:
- Scale: 1/10, 1/12
- Brushless: Yes
- Sensored: Yes
- Pole Count: 2
- KV Rating: 3200kV
- LiPo Cells: 2-3S
- No-Load Current(A): 4A
- Outer Diameter: 35.9mm (1.413")
- Length: 52.5mm (2.067")
- Shaft Diameter: 3.17mm (0.125")
- Weight: 175g (6.17oz)
- Timing: Fixed
Includes:
- (1) Justock G3SS ESC
- (1) Justock 13.5T G2.1 brushless motor
- (1) 5V cooling fan
- (1) Sensor cable
Let customers speak for us
from 52 reviewsit showed up fast, works as advertised
I got what I wanted at a good price and fast delivery. It arrived 2 days before estimate date.
John G
Just what I was looking g for. Excellent
Looks amazing and would definitely buy again, wish the gaps were tighter so the sticker looks more like it’s one piece, definitely recommend having a heat gun or a hair dryer with you as the stickers didn’t wanna stick overly well. Bottom of the external battery sticker isn’t the best as the holes for the rubber strips weren’t big enough
Fast shipping and case is exactly what I needed to protect my Flysky…had to do a little altering for the handle.
Good quality frame. Got the yellow which is more of a gold/orange colour which i like. I haven’t installed it yet, but i’m very happy with it.
Great product, easy to apply. Only suggestion I have would be to add a picture of where each sticker is to be applied. Some may have a hard time figuring out where some of the smaller stickers go.
The cost is good, the quality of the design is good and most of all the functionality is amazing. All of my RC road cars are run with these great receivers. I would recommend them. 5 stars!
Great case bought on sale, but well worth the full price.
Great case. Radio fits nice and snug.
NB4+ Case is awesome
The case is great quality and fits the radio perfectly!
thanks for fast shipping
Received outstanding service! Very supportive organization!