FS-i6 6CH 2.4GHz AFHDS RC Transmitter

FS-i6 6CH 2.4GHz AFHDS RC Transmitter w/FS-iA6B Receiver

The transmitter and receiver have been pre-bound before delivery.If you are using another transmitter or receiver, follow the steps below to bind to the B/VCC port on the receiver.
1, Connect the supplied bind cable to the B/VCC port on the receiver.
2, Insert power into any other port.
3, Hold the "BIND KEY" while powering on the transmitter to enter bind mode.
4, Remove the power and bind cable from the receiver. Then connect the power cable to the B/VCC port.
5, Check the servos' operation. If anything does not work as expected, restart this procedure from the beginning.

FS-i6 Specifications:
Channels: 6 CH
Model Type: Glider/Heli/Airplane
RF Range: 2.40-2.48GHz
brandwidth: 500KHz
RF Power: Less Than 20dBm
2.4ghz System: AFHDS 2A and AFHDS
Code Type: GFSK
Sensitivity: 1024
Low Voltage Warning: less than 4.2V
DSC Port: PS2;Output:PPM
Charger Port: No
ANT length: 26mm*2(dual antenna)
Transmitter Weight: 392g
Transmitter Size: 174x89x190mm
Package Size: 23.5x21.2x10.6cm
Package Weight: 676g
Power: 6V, 4*AA Battery(Not included)
Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight.
On-line update:yes
Certificate: CE0678,FCC
Model Memories: 20
Control Range: 500m

FS-iA6B Specifications:
Channel: 6CH
Frequency Range: 2.4055--2.475GHZ
brand Width Number: 140
Transmitting Power: ≤ 20dBm
RF Receiver Sensitivity: -105dbm
2.4G system: AFHDS 2A
Code type: GFSK Antenna Length: 26mm * 2(dual antenna)
Input Power: 4.0-6.5V DC
Dimension: 47x26.2x15mm
Weight: 14.9g
i-Bus Interface: Yes
Data Acquisition Interface: Yes
Model Type: Airplane/Glider/Helicopter
Compatible Transmitter: Compatible with FS-i6,FS-I6X,FS-I6S,FS-i4

Package Included:
1 x FS-i6 transmitter
1 x FS-iA6B Receiver
1 x Manual

,,,,,,,,,,,,

for RC Multirotor Helicopter Airplane Glider Quadcopter