Hobbywing QUICRUN 3650 Sensored brushless motor G2
Hobbywing QUICRUN 3650 Sensored brushless motor G2
Thank you for participating in our Black Friday sale! Due to higher than expected order volumes, we may experience some delivery delays. But we promise that your patience will be well rewarded as we work hard to ensure that every order is delivered safely and quickly.
Shipping to
Estimated delivery on
- Complete after-sales technical support
Hot-selling Rroduct Recommendations
30 in stock
Couldn't load pickup availability
QR 3650 SD 2 POLE for 1:10 & 1:12 Cars & Trucks (SPORT)
High Efficiency means more POWER while keeping TEMP low!- Built-in Hall sensor brings drivers an amazing sense of control.
- Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings.
- Dustproof design where motor leads exit.
- Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections.
- Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor.
Screw Spec
a) The M3 (diameter=3.0) screws are suitable for installation of the QUICRUN-3650-SENSORED motor.
b) Depth of screw holes: QUICRUN-3650-SENSORED <= 5mm.
Motor Spec
- Motor Dimension (mm): Outer Diameter 36mm Length 52.8mm
- Shaft dimension (mm): 3.17mm, Length of Projecting part 15mm
| Model | PN (SKU) | KV | LiPo | Resist. (Ω) |
*No-load Current (A) |
Max. Ouput Power | Current at the Point of M.O.P* | Weight (g) |
| 6.5T | 30404312 | 5750kv | 2S | 0.0066 | 4.6 | 194 | ||
| 8.5T | 30404311 | 4560kv | 2S | 0.0125 | 3.6 | 186 | ||
| 10.5T | 30404309 | 3600KV | 2-3S | 0.0183 | 2.8 | 240W | 62A | 186 |
| 13.5T | 30404310 | 2850KV | 0.0289 | 2.4 | 180W | 50A | 186 | |
| 17.5T | 30404306 | 2170KV | 0.0488 | 1.6 | 125W | 35A | 186 | |
| 21.5T | 30404307 | 1800KV | 0.0747 | 1.3 | 95W | 28A | 186 | |
| 25.5T | 30404308 | 1520KV | 0.1 | 1.1 |
Note 2: The maximum output power is the test value obtained when the voltage is 7.4V, and the ESC timing is set to 0 degrees.
Gear Selection (IMPORTANT!)
It is very important to select the reasonable gear ratio, as inappropriate selection may cause great loss to users. Please select the correct gear ratio according to the following points!
- Operating Temperature of the Motor During the operation, the motor temperature e should be lower than 90 ℃ (194℉). Temperatures above 90℃ will demagnetize the magnet & may melt the coils and eventually damage the ESC (because of strong current). Therefore, the most effective way to prevent over-heat is to select the right gear ratio.
- A principle of Gear Selection To avoid potential risks, caused by overheating, which may lead to ESC/motor damage or malfunction, please start with very small pinion and check ESC & motor temperatures frequently throughout a run. This is the only way to guarantee that you are not causing excessive heating. If Motor and the ESC temperatures remain stable and low in the running, then you can slowly increase the pinion (with more teeth) while again monitoring the temperatures to determine the safe gearing for your vehicle and motor. Because the climate and track conditions always change, please keep monitoring ESC & motor temperatures to protect your electronics from damage.
- Gear Ratio(s) Suggested The below form shows some rough data about gear ratios (these recommended ratios are reference values when setting the ESC to the Zero Timing Mode). If you don’t know how to set the suitable gear ratio, please begin with a big ratio (i.e. small pinion) and then adjust as required, or consult with on-site drivers who are using the same power unit for basic information.
Let customers speak for us
Very quick service. Thank you!
Hello I want thank Soarsky for sending my nb4 barttery order 1750 . Finally received , this company is great and really do care about its customer. I want to correct my pass review and thanks you
Easy replacement process to get radio up and running went you have an accident.
Fitment was good. Stuck well. Would buy again.
Just arrived and was shipped quickly. Can't wait to set it up and start using it. Packaged well with all parts. Will definitely purchase again.
Site de très bonne qualité
2 semaines seulement pour recevoir la commande en France !
Parfait rien à dire de négatif
nice battery
I have resitly upgraded my radio to a NB4+ and I spent good money on it and I started thinking maybe I should get a case for it to keep it nice as I can, though I've never had a case before it was time to start so I ordered Soarsky case and I must say this was the perfect case for my radio has a storage pocket on the inside lid to keep stuff a couple extra slot for things and some extra room, I'm very happy with this purchase, and I do recomened this case for yor Noble remote.
it showed up fast, works as advertised
I got what I wanted at a good price and fast delivery. It arrived 2 days before estimate date.
John G
Just what I was looking g for. Excellent
Looks amazing and would definitely buy again, wish the gaps were tighter so the sticker looks more like it’s one piece, definitely recommend having a heat gun or a hair dryer with you as the stickers didn’t wanna stick overly well. Bottom of the external battery sticker isn’t the best as the holes for the rubber strips weren’t big enough
Fast shipping and case is exactly what I needed to protect my Flysky…had to do a little altering for the handle.
Good quality frame. Got the yellow which is more of a gold/orange colour which i like. I haven’t installed it yet, but i’m very happy with it.
Great product, easy to apply. Only suggestion I have would be to add a picture of where each sticker is to be applied. Some may have a hard time figuring out where some of the smaller stickers go.
Total items
Product subtotal
Collections
-
New Products
The latest products on Soarsky Store, quickly learn about the latest products...
