Votre panier
Your cart is empty
Continue shopping
DolphinRC Shadow X5 5-Inch FPV Racing Frame Kit
Incrementos de 1
Mínimo de 1
Máximo de
Stock faible
En stock, prêt à être expédié
Prix de vente
$52.99
-12%
Prix normal
$59.99
Prix normal
$52.99
Prix unitaire
Taxe inclu.
Expédition calculée à la caisse.
Paiement sécurisé
Assistance technique
La plupart des commandes sont expédiées sous 48 heures
Shipping calculated at checkout. Shipping policy
DolphinRC Shadow X5 5-Inch FPV Racing Frame Kit
Prix de vente
$52.99
Prix normal
$59.99
Prix normal
$52.99
Prix unitaire
Let customers speak for us
Fantastique
The stickers ( wrap) is exactly like annonced, the quality is very good, thin and very sticky, love the result and recommend it, thank you
Jacques
Super radio w konkurencyjnej cenie. Polecam
Łukasz
Excellent replacement battery!
The new battery brings my Flysky Paladin transmitter back to operational condition. The new battery fit perfectly and attached easily, charged quickly and to full capacity. Very pleased with the battery.
M Takahashi
Nice Skin 100% Perfekt Match
Perfekt Sin 100% Match
1⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
MICHAEL
Perfect
A perfect substitute, my Noble is working again!
Andreas Sommerfelt
going to need it i heard about half way through the season. we'll see. thank you
Craig
Lademodul Paladin PL18-EV
Die Module passten super in den Sender, habe 2 Sender umgerüstet und absolut Top
Hatte Probleme mit alten Modulen mit den Micro Steckern
Diese Module gibt es in Germany nicht zu kaufen.
Best Regards
Ludwig Baumann
Ludwig Baumann
Great Upgrade
The Nova is a real upgrade--especially with the addition of a timer.
Richard Wick
I was extremely great full with the quality and availability
These are high quality remote controllers and knowing I can get switches and levers is awesome, as I own 5 of them for all my trucks and equipment.
Dwight Vander Linde
Easy to charge
I putchased this power bank for my Noble NB 4+ cause my Pro was so easy to charge when it needed to be charge, I just stand it up on the base and pick it up when it's done. I wouldn't have it any other way.
Glenn Priece
As always, a great buying experience.
As always, a great buying experience.
Thanks.
Yaron.B
Great frame
Great frame for the money, pretty fast shipping considering it came from over seas
OverFlowFpv
This is a must have.
Awesome, hands ands down. Easy set up and feels very sturdy.
Kyle Reed
Easy Install
Plug and play installation, just ensure that the models are backed up, import it back and bind your receivers and your good to go, nice upgrade for the original nb4.
Jerrywin Waga
Easy to fit and works!
Mark
Description
The DolphinRC Shadow X5 is a lightweight FPV racing frame kit for 5–5.1-inch propellers. Its T700 carbon-fiber structure, 7075-T6 aluminum components and quick-swap arms suit pilots who want a compact race build that is easier to service between flights. The specified frame weight is 51 ± 0.1 g, excluding 3D-printed parts; this is not the weight of a complete drone.
Key Features
- T700 carbon-fiber plates: a lightweight structural foundation for a dedicated racing build.
- 7075-T6 aluminum center structure and standoffs: compact support around the flight electronics.
- Quick-swap arms: an accessible arm-retention arrangement simplifies replacement and maintenance.
- Extended arm contact: the embedded joint increases the contact area between the arms and center structure.
- Grade 12.9 YFS hardware: the supplied structural screw set includes motor mounting screws; separate lightweight aluminum fasteners are used for the flight stack.
- Race-focused accessories: camera mounts, a shark fin, battery pads and a custom Kevlar battery strap support a compact assembly.
The removable Stack Saver protective strap is designed to help shield the electronics from grass and loose debris while retaining access for maintenance. It is not a waterproof enclosure and cannot prevent all impact damage.
Version Guide
Frame
Choose the frame kit for a build using your separately selected electronics.
Frame + Arms
Option with additional arms. The extra-arm quantity is not specified in the supplied package list; confirm it before ordering if required.
Frame + 4*Motors (Purple)
Motor bundle listed with four purple motors. Confirm the exact motor model and KV before choosing electronics.
Frame + 4*Motors (Red)
Motor bundle listed with four red motors. Color alone does not establish motor specifications.
This is a kit, not a ready-to-fly drone. Do not assume electronics, a battery, propellers or radio equipment are included unless explicitly listed for the selected option. Photos of an assembled build illustrate installation.
Specifications & Compatibility
Dimensions: 146 × 160 × 68 mm, including shark fin
Wheelbase: 191 mm
Specified frame weight: 51 ± 0.1 g, excluding 3D-printed parts
Camera mounting size: 14 mm
Flight stack: maximum 40 × 40 mm footprint; 20 × 20 mm mounting pattern with Ø3 mm holes
VTX: maximum 40 × 40 mm footprint; 20 × 20 mm mounting pattern with Ø3 mm holes
Motor mounting: 16 mm spacing, two Ø3 mm holes, as specified in the assembly guide
Internal flight-stack clearance: 23 mm
Arm width: 5 mm, as labeled in the supplied specification sheet
Top and bottom plates: 2 mm each; aluminum part thickness: 4.1 mm
Standoff dimensions: M3 × 5 × 23 mm, as listed by the supplier
Recommended battery: 1250–1450 mAh, 6S
Recommended propellers: 5–5.1 inches; recommended motor sizes: 2207 or 2306
Check the actual board outline, component height, wiring clearance and mounting hardware before selecting a flight stack or VTX. A 40 × 40 mm maximum board footprint does not mean a 30.5 × 30.5 mm mounting pattern is supported. The 6S recommendation applies to the intended build; every electrical component must separately support the chosen battery.
The supplied materials use both “Wide X” and “Squashed X” for the layout. Because those labels conflict, use the dimensions and assembly drawing below when planning fitment.
Package Includes
The supplied standard frame-kit list contains:
- Shadow frame × 1
- 55° printed camera mount × 1
- 58° printed camera mount × 1
- Battery anti-slip pad × 2
- Screw pack × 1
- Custom Kevlar strap, listed as M15 × 270 mm × 1
- Black dust-proof strap × 1
- Printed dust-proof strap × 1
- Keychain × 1, shown in the package image
Additional arms or motors depend on the selected option. The standard list does not specify the extra-arm quantity or bundled motor model/KV.
Installation Instructions
Preview the Shadow Frame Assembly Manual V1.0 below. Open the full-size image to inspect the exploded arrangement and screw callouts before assembly.
Open full-size installation drawing →
- Identify the plates, arms, standoffs and screw lengths using the exploded drawing before tightening the assembly.
- Dry-fit the center structure and arms, checking that contact surfaces seat correctly without forcing the joint.
- Check the camera mount, flight stack and VTX clearances before routing wires and closing the top plate.
- Keep wiring away from sharp carbon edges and moving parts. Check motor-screw length against your motors so screws cannot contact windings.
- Perform electrical checks and configuration with propellers removed. Before flight, check fasteners, arm retention, camera security and propeller clearance.
The drawing is the supplied assembly reference, not a torque specification. No tightening torque or universal motor-screw length is provided here. A frame and shark fin cannot guarantee safe turtle-mode recovery or protection from a crash.
3D Printed Parts
The supplier describes open-source TPU camera mounts covering 50–60° in 1° steps. These printable options are separate from the physical 55° and 58° mounts listed in the standard kit. Do not assume every available angle is included as a printed part.
View Shadow camera-mount files on MakerWorld →
The external MakerWorld page is the source for model previews, downloadable files and any supplied print-profile instructions. Check the chosen model, material and fit before printing; no unverified STL download, license terms or slicer settings are reproduced here.
Before You Order & FAQ
Is this a complete drone?
No. It is a frame kit with option-dependent extras. Choose the remaining components separately and check the selected bundle.
Does the 51 g figure include printed parts?
No. The stated 51 ± 0.1 g excludes 3D-printed parts and is not a finished aircraft weight.
Will any HDZero system fit?
No universal fit is promised. Check the specific camera against the 14 mm camera mounting size and the VTX against the stated footprint, 20 × 20 mm hole pattern and available clearance.
Are all camera angles supplied?
The standard list specifies one 55° mount and one 58° mount. Other angles described in the print resources are not automatically physical kit inclusions.
Which motor bundle should I choose?
The listed options distinguish purple and red motors, but the supplied materials do not establish their exact model or KV. Confirm those details before finalizing the power system.
FPV Reading Guides
These general SoarSky guides help with build planning; they are not Shadow X5-specific reviews or installation manuals.
- FPV frame guide: frame types and how to choose
- Motor KV and propeller matching: efficiency and current safety
- Choosing an FPV flight controller for beginners
Choose your Shadow X5 option after checking the assembly drawing and component dimensions. If you need the exact motor-bundle specifications or additional-arm quantity, contact SoarSky before ordering.
Informations sur l'expédition
🏭 Entrepôts de distribution
SoarSky gère des entrepôts aux États-Unis, en Europe et en Chine. Les commandes sont expédiées depuis l'entrepôt local le plus proche. Si le stock local n'est pas disponible, votre commande sera expédiée depuis notre entrepôt en Chine et les délais d'expédition internationaux s'appliqueront.
💰 Tarifs d'expédition
| Type | Condition | Coût |
|---|---|---|
| Livraison gratuite | Commandes de plus de 100 $ | Gratuit |
| Livraison standard | Commandes de moins de 100 $ | Selon le poids et l'adresse |
| Livraison internationale | Toutes les commandes internationales | Selon la destination et le poids |
💡 Avis fiscal : Les taxes d'importation sont couvertes par SoarSky RC pour la plupart des pays. Pour un petit nombre de pays où la réglementation locale exige que le destinataire paie les taxes, le montant est basé sur la valeur déclarée fixée par SoarSky RC.
⏱️ Délais d'expédition et de livraison
⚡ La plupart des commandes sont expédiées dans les 48 heures suivant leur passation.
| Région | Livraison estimée |
|---|---|
| National (États-Unis) | 5 à 10 jours ouvrables |
| International | 10 à 15 jours ouvrables |
* Le traitement douanier peut affecter les délais de livraison internationaux.
🚫 Restrictions d'expédition
⚠️ Important : Nous ne pouvons pas livrer aux boîtes postales, aux adresses APO/FPO ou à d'autres adresses militaires.
Certaines zones éloignées peuvent connaître des délais de livraison plus longs ou des options d'expédition limitées. Nous vous informerons en cas de problème.
📦 Suivi de commande
Une fois votre commande expédiée, vous recevrez un e-mail de confirmation avec un numéro de suivi. Suivez votre envoi via :
| Plateforme | Lien |
|---|---|
| 17Track | www.17track.net |
| Suivi de commande SoarSky | soarskyrc.com/pages/track-order-1 |
📬 Contactez-nous
Si vous rencontrez des problèmes tels que des articles endommagés ou des colis perdus, veuillez contacter notre équipe du service client dès que possible et nous nous efforcerons de les résoudre rapidement.
✅ E-mail : soaringskystore@protonmail.com