Tige de tringlerie FMS 1300 mm PA-18

    FMS SKU : FMSEL115

    En stock, prêt à être expédié

    Prix de vente $4.99 -100% Prix normal $0.00
    Prix normal $4.99
    Taxe inclu. Expédition calculée à la caisse.

    Paiement sécurisé

    Assistance technique

    La plupart des commandes sont expédiées sous 48 heures

    Shipping calculated at checkout. Shipping policy

    Tige de tringlerie FMS 1300 mm PA-18
    Prix de vente $4.99 Prix normal $0.00
    Prix normal $4.99
    Frequently Asked Questions
    Which RC plane is this linkage rod set for?

    This is an FMS factory linkage rod set designed for the FMS 1300mm PA-18 Super Cub, connecting servos to control surfaces.

    What parts are included in the linkage rod set?

    Includes the servo pushrods and linkage connectors required for the PA-18. Exact quantity and specifications are as per the physical product.

    How do I adjust the linkage rod length?

    Loosen the locking screw on the linkage connector, rotate the pushrod body to adjust length, then re-tighten once correct control surface travel is achieved. Avoid over-stretching or bending.

    What if the linkage rod is bent?

    Minor bends may be carefully straightened. If severely deformed or threads are damaged, replace immediately to avoid impaired control surface precision and flight instability.

    Any tips for installation?

    Install the servo end first, connect the receiver to test servo neutral position, then adjust rod length to center the control surface, and finally lock both ends.

    What's in the Box
    • 1x Linkage Rod Set — PA-18 servo pushrod set

    Recommandations