Hobbywing QUICRUN 10BL60 SENSORED G2 ESC&COMBO (2S) for 1/8 1/10 RC Car Truck
Hobbywing QUICRUN 10BL60 SENSORED G2 ESC&COMBO (2S) for 1/8 1/10 RC Car Truck
SKU Number：
SKU:
Shipping to
Estimated delivery on
- Complete after-sales technical support
Hot-selling Rroduct Recommendations
30 en stock
Impossible de charger la disponibilité du service de retrait
- Crafted for entry-level and intermediate builders, this ESC features exceptional quality and a user-friendly design. It eliminates complex setup, enabling users to start immediately without complicated tuning or troubleshooting.
- Equipped with a powerful built-in BEC.
- With Boost/Turbo timing adjustments of up to 24 degrees, this ESC maximizes motor power, providing an immediate surge in speed when required.
- Support Motor Rotation Adjustment
- A robust hardware foundation combined with advanced software equips this ESC with strong current resistance and comprehensive protective features, greatly enhancing its reliability and durability.
- The ESC offers three programming options: a multi-function LCD programming box, an LED programming box, and a SET button, providing users with flexible and convenient parameter adjustment.
Programmable items:
Screw Spec
a) The M3 (diameter=3.0) screws are suitable for installation of the QUICRUN-3650-SENSORED motor.
b) Depth of screw holes: QUICRUN-3650-SENSORED <= 5mm.
Motor Spec
- Motor Dimension (mm): Outer Diameter 36mm Length 52.8mm
- Shaft dimension (mm): 3.17mm, Length of Projecting part 15mm
| Model | PN (SKU) | KV | LiPo | Resist. (Ω) |
*No-load Current (A) |
Max. Ouput Power | Current at the Point of M.O.P* | Weight (g) |
| 6.5T | 30404312 | 5750kv | 2S | 0.0066 | 4.6 | 194 | ||
| 8.5T | 30404311 | 4560kv | 2S | 0.0125 | 3.6 | 186 | ||
| 10.5T | 30404309 | 3600KV | 2-3S | 0.0183 | 2.8 | 240W | 62A | 186 |
| 13.5T | 30404310 | 2850KV | 0.0289 | 2.4 | 180W | 50A | 186 | |
| 17.5T | 30404306 | 2170KV | 0.0488 | 1.6 | 125W | 35A | 186 | |
| 21.5T | 30404307 | 1800KV | 0.0747 | 1.3 | 95W | 28A | 186 | |
| 25.5T | 30404308 | 1520KV | 0.1 | 1.1 |
Note 2: The maximum output power is the test value obtained when the voltage is 7.4V, and the ESC timing is set to 0 degrees.
Gear Selection (IMPORTANT!)
It is very important to select the reasonable gear ratio, as inappropriate selection may cause great loss to users. Please select the correct gear ratio according to the following points!
- Operating Temperature of the Motor During the operation, the motor temperature e should be lower than 90 ℃ (194℉). Temperatures above 90℃ will demagnetize the magnet & may melt the coils and eventually damage the ESC (because of strong current). Therefore, the most effective way to prevent over-heat is to select the right gear ratio.
- A principle of Gear Selection To avoid potential risks, caused by overheating, which may lead to ESC/motor damage or malfunction, please start with very small pinion and check ESC & motor temperatures frequently throughout a run. This is the only way to guarantee that you are not causing excessive heating. If Motor and the ESC temperatures remain stable and low in the running, then you can slowly increase the pinion (with more teeth) while again monitoring the temperatures to determine the safe gearing for your vehicle and motor. Because the climate and track conditions always change, please keep monitoring ESC & motor temperatures to protect your electronics from damage.
- Gear Ratio(s) Suggested The below form shows some rough data about gear ratios (these recommended ratios are reference values when setting the ESC to the Zero Timing Mode). If you don’t know how to set the suitable gear ratio, please begin with a big ratio (i.e. small pinion) and then adjust as required, or consult with on-site drivers who are using the same power unit for basic information.
Let customers speak for us
I like how they changed the battery compartment
Love the batteries now I have a back up when racing
Great skin for my transmitter. Took it to the next level! Everything went on and is staying on. Only complaint i have is that there were no instructions. Which doesn't matter for most pieces.
I had read where several people were having trouble with their FlySky NB4+ brake trigger breaking off. I did not have that issue, but I also didn't want it happening to me, so I decided to order this replacement (& upgraded) throttle/brake trigger. Mine was the red anodized version to match the rest of the aluminum parts on my transmitter. I am very happy with 1. How relatively easy it was to install. 2. How it looks and 3. How well it works. Thanks!
This is exactly what my son and I needed to make trips with the RCs easier. Whether it's to the track, park, or grandparents, this bag does the trick very well.
Works as it was designed to.
Fits really nicely and works well. Well made and light weight while protecting the connections. First saw it on WTF RC Cars Youtube!
Really like this product, it’s smaller and lighter than the base battery u get with the noble nb4 and way more stylish. Also it’s magnetic which is handy in the pits. Loos cool and works well 👍🏻
Got this and the ribbon cable. Installed and working.
Awesome store! This was the only place where I could find the parts I need.
Product is good, i ordered NB4 Outer case but they sent me a NB4+.
Needed to fix the broken battery tabs. This did the trick. But it’s a lot of work to replace.
Ordered almost one month ago, finally arived (China to Romania). Very satisfied of quality. I own Osmo 5 Pro, all accessories have it's own spaces.
Great product and quick delivery.
Great company to deal with. Rapid delivery. Springs perfect 👌
Total des articles
Sous-total des produits
Collections
-
Voitures RC
Divers modèles de voitures RC, dont FMS/KM/ARRAM, etc.
-
Nouveaux produits
Les derniers produits sur Soarsky Store, découvrez rapidement les derniers produits lancés...
