HobbyWing XERUN XR10 Justock G3S 60A combo Suitable for 1/10 RC Drift Cars
HobbyWing XERUN XR10 Justock G3S 60A combo Suitable for 1/10 RC Drift Cars
SKU Number：
SKU:
Shipping to
Estimated delivery on
- Complete after-sales technical support
Hot-selling Rroduct Recommendations
20 auf Lager
Verfügbarkeit für Abholungen konnte nicht geladen werden
Combo Overview:
The Hobbywing XR10 Justock G3SS Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 motor is an ideal stock motor for both 1/10 and 1/12 on and off-road racing. These two components paired together make for an ideal choice for beginners and experts alike.
Note: This product photo may not fully depict the described item. For comprehensive details on the listed product, please refer to the specifications provided.
Features:
- ESC:
- Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
- Programmable via OTA Wireless module or 3in1 program box
- Built-in capacitor module eliminates the need for external capacitors and unwanted space
- RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
- Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
- Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
- Calibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to use
- Supports both CCW (counterclockwise) and CW (clockwise) motor directions
- Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
- ESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through corners
- Built-in data logging for post-run reports
- Motor:
- Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
- Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
- Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
- Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
- This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
- The motor design is in compliance with IFMAR, and ROAR specifications
Specifications:
- ESC:
- Continuous Current: 60A
- Burst Current: 380A
- Battery: 2S Lipo (Only 2S)
- Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
- ESC programming: Independent programming port
- Motor Supported: Sensor and sensorless brushless motor
- Motor Limit: 10.5T, or greater,3650 Motor
- Application: 1/10, 1/12 On-road and Off-road
- Cooling Fan: Powered by BEC
- Size: 40.9x33.9x32.1mm (LxWxH)
- Weight: 75.4g (Including weight of wire)
- ROAR Approval: Yes
- Motor:
- Scale: 1/10, 1/12
- Brushless: Yes
- Sensored: Yes
- Pole Count: 2
- KV Rating: 3200kV
- LiPo Cells: 2-3S
- No-Load Current(A): 4A
- Outer Diameter: 35.9mm (1.413")
- Length: 52.5mm (2.067")
- Shaft Diameter: 3.17mm (0.125")
- Weight: 175g (6.17oz)
- Timing: Fixed
Includes:
- (1) Justock G3SS ESC
- (1) Justock 13.5T G2.1 brushless motor
- (1) 5V cooling fan
- (1) Sensor cable
Let customers speak for us
I like how they changed the battery compartment
Love the batteries now I have a back up when racing
Great skin for my transmitter. Took it to the next level! Everything went on and is staying on. Only complaint i have is that there were no instructions. Which doesn't matter for most pieces.
I had read where several people were having trouble with their FlySky NB4+ brake trigger breaking off. I did not have that issue, but I also didn't want it happening to me, so I decided to order this replacement (& upgraded) throttle/brake trigger. Mine was the red anodized version to match the rest of the aluminum parts on my transmitter. I am very happy with 1. How relatively easy it was to install. 2. How it looks and 3. How well it works. Thanks!
This is exactly what my son and I needed to make trips with the RCs easier. Whether it's to the track, park, or grandparents, this bag does the trick very well.
Works as it was designed to.
Fits really nicely and works well. Well made and light weight while protecting the connections. First saw it on WTF RC Cars Youtube!
Really like this product, it’s smaller and lighter than the base battery u get with the noble nb4 and way more stylish. Also it’s magnetic which is handy in the pits. Loos cool and works well 👍🏻
Got this and the ribbon cable. Installed and working.
Awesome store! This was the only place where I could find the parts I need.
Product is good, i ordered NB4 Outer case but they sent me a NB4+.
Needed to fix the broken battery tabs. This did the trick. But it’s a lot of work to replace.
Ordered almost one month ago, finally arived (China to Romania). Very satisfied of quality. I own Osmo 5 Pro, all accessories have it's own spaces.
Great product and quick delivery.
Great company to deal with. Rapid delivery. Springs perfect 👌
Artikel gesamt
Produktzwischensumme
Collections
-
Neue Produkte
Die neuesten Produkte im Soarsky Store: Informieren Sie sich schnell über die...
