{"title":"Lumenier","description":null,"products":[{"product_id":"beginner-diy-fpv-drone-kit-qav-s-2-joshua-bardwell-se-5-inch-hd-ready","title":"Beginner DIY FPV Drone Kit – QAV-S 2 Joshua Bardwell SE 5 inch – HD Ready","description":"\u003c!-- SOP:v1.6 | 2026-08-18 | executor:Sidekick --\u003e\n\u003cp\u003eThe \u003cstrong\u003eQAV-S 2 Joshua Bardwell SE 5\" HD Ready DIY Kit\u003c\/strong\u003e is a curated beginner-to-intermediate FPV drone build kit developed in collaboration between Lumenier, Xilo, and FPV educator Joshua Bardwell. Every component is pre-selected for compatibility and performance — you get the frame, motors, flight stack, and propellers in one box, plus access to Joshua Bardwell’s full step-by-step build guide series covering assembly, Betaflight setup, radio binding, tuning, and first flight.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eHD Ready\u003c\/strong\u003e version — no FPV video system is included, so you can add your own \u003cstrong\u003eDJI O3\u003c\/strong\u003e, \u003cstrong\u003eWalksnail\u003c\/strong\u003e, or analog system. The QAV-S 2 frame supports all three mounting configurations out of the box.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e✅ \u003cstrong\u003eQAV-S 2 Joshua Bardwell SE Frame\u003c\/strong\u003e — Upgraded 5\" carbon fiber freestyle frame with X-Lock lateral arm locking system (two-axis clamping, mechanically isolated from the stack), aluminum FPV camera plates, and rear 25.5mm M1.6 mount holes for DJI O3 \/ Walksnail direct mounting.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eXilo Stax V2 F4 + 45A Stack\u003c\/strong\u003e — F4 flight controller with latest Betaflight firmware compatibility, paired with a 45A BLHeli_32 ESC (3–6S) with current sensor and telemetry. Proven stack combination for freestyle and 6S builds.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eXilo Stealth 2207 1800KV 6S Motors\u003c\/strong\u003e — Four high-performance brushless motors optimized for 6S power systems and 5-inch propellers. Smooth, powerful, and reliable for freestyle and cinematic flying.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eJB Gemfan Hurricane 51477 Propellers\u003c\/strong\u003e — Three sets of Joshua Bardwell’s signature 5.1\" propellers, tuned for the Stealth 2207 motor and 6S power system.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eHD Ready — Choose Your Own FPV System\u003c\/strong\u003e — Compatible with DJI O3 (rear-mount), DJI Vista \/ Walksnail (rear-mount), and HDZero (center-mount). FPV system sold separately — add the system you already own or prefer.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eFull Build Guide by Joshua Bardwell\u003c\/strong\u003e — Step-by-step video series covering the complete build: soldering, Betaflight configuration, radio binding, tuning, and first flight. Suitable for first-time builders.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003eX-Lock Arm Mechanism\u003c\/strong\u003e — All-aluminum arm locking system with two-axis clamping, mechanically isolated from the main plates and FC stack. Arms fold with a single screw for easy transport.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv style=\"background-color: #1a2b3c; color: #ffffff; display: flex; align-items: center; padding: 10px 14px; border-radius: 6px 6px 0 0; font-size: 14px; font-weight: 600;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eComponent\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eSpecification\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #ffffff; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eFrame\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eLumenier QAV-S 2 JB SE 5\" (X-Lock, aluminum cam plates)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #f5f8fc; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eProp Clearance\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eUp to 5.1\"\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #ffffff; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eMotors\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eXilo Stealth 2207 1800KV 6S ×4\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #f5f8fc; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003ePropellers\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eJB Gemfan Hurricane 51477 ×3 sets\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #ffffff; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eFlight Controller\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eXilo Stax V2 F4 (Betaflight)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #f5f8fc; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eESC\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eXilo Stax V2 45A BLHeli_32 (3–6S, current sensor)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #ffffff; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eFPV System\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eNot included (HD Ready — choose your own)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #f5f8fc; border-bottom: 1px solid #e8e8e8; font-size: 14px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eRecommended Battery\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003e6S LiPo\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; align-items: center; padding: 10px 14px; background: #ffffff; border-bottom: 1px solid #e8e8e8; font-size: 14px; border-radius: 0 0 6px 6px;\"\u003e\n\u003cspan style=\"flex: 1;\"\u003eHD System Compatibility\u003c\/span\u003e\u003cspan style=\"flex: 1; text-align: right;\"\u003eDJI O3 \/ Walksnail (rear) \/ HDZero (center)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #666666; font-size: 13px;\"\u003e\u003cem\u003eSpecifications sourced from Lumenier and Xilo official documentation.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× Lumenier QAV-S 2 Joshua Bardwell SE 5\" Frame Kit\u003c\/li\u003e\n\u003cli\u003e4× Xilo Stealth 2207 1800KV 6S Motor\u003c\/li\u003e\n\u003cli\u003e1× Xilo Stax V2 F4 Flight Controller\u003c\/li\u003e\n\u003cli\u003e1× Xilo Stax V2 45A ESC (BLHeli_32, 3–6S)\u003c\/li\u003e\n\u003cli\u003e3× JB Gemfan Hurricane 51477 Propeller set\u003c\/li\u003e\n\u003cli\u003e1× Connecting Wires Set\u003c\/li\u003e\n\u003cli\u003e1× 3D Printed Parts Set\u003c\/li\u003e\n\u003cli\u003e1× Hardware Set\u003c\/li\u003e\n\u003cli\u003e1× Frequency \u0026amp; Voltage Chart Sticker Sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"background-color: #fff8e0; padding: 12px 14px; border-left: 4px solid #FFBF00; border-radius: 4px; margin: 15px 0;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e⚠️ \u003cstrong\u003eImportant:\u003c\/strong\u003e FPV video system (camera + VTX or digital air unit), radio receiver, radio transmitter, FPV goggles, 6S LiPo batteries, and battery charger are \u003cstrong\u003enot included\u003c\/strong\u003e and must be purchased separately. A radio receiver compatible with your transmitter must be soldered to the FC before first flight. Basic soldering skills are required for assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: center; margin: 15px 0;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0742\/4013\/1357\/files\/QAV-S2_Bardwell_Infographic_HD_Ready.jpg?v=1787064852\" alt=\"QAV-S 2 Joshua Bardwell SE 5 inch HD Ready FPV DIY drone kit component overview | SoarSky\" style=\"max-width: 500px; width: 100%; border-radius: 8px;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center; color: #666666; font-size: 13px; margin-top: -10px;\"\u003e\u003cem\u003eQAV-S 2 Joshua Bardwell SE HD Ready kit — frame, motors, Xilo Stax V2 stack, and Gemfan 51477 propellers\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eRelated Collections\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/soarskyrc.com\/collections\/dolphin-rc\" title=\"DolphinRC Products at SoarSky\"\u003eDolphinRC Products at SoarSky \u003c\/a\u003e— Complete FPV drone kits and builds\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/soarskyrc.com\/collections\/fpv-frame\" title=\"FPV Drone Frame\"\u003eFPV Drone Frame\u003c\/a\u003e — Motors, ESCs, flight controllers, and accessories for your build\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/soarskyrc.com\/collections\/fpv-flight-controller\" title=\"Soarsky RC FPV Drone Flight Controller\"\u003eFPV Flight Controllers\u003c\/a\u003e — All FC stacks and standalone controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center; margin-top: 24px;\"\u003e\u003cstrong\u003eReady to build your first 5-inch freestyle FPV drone?\u003c\/strong\u003e\u003cbr\u003eAdd the QAV-S 2 Joshua Bardwell SE HD Ready Kit to your cart and start building today.\u003c\/p\u003e","brand":"SoarSky","offers":[{"title":"Default Title","offer_id":48798123753757,"sku":"SS-202503SID347","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/4013\/1357\/files\/lumenier-qav-s-2-joshua-bardwell-se-5_-frame-kit-in-box_1_1.png?v=1720796106"},{"product_id":"lumenier-lux-hd-aio-g4-fc-35a-blheli-32-3-6s-esc","title":"Lumenier LUX HD AIO – G4 FC + 35A BLHeli_32 3-6S ESC","description":"\u003cp\u003eThe Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful solderless AIO ready to power the DJI O3 in a simple configuration. The LUX HD AIO G4 builds on all the best features of its predecessors and further improves on hardware components and layout, and is now dedicated to a design for the DJI systems. The FC uses a G4 processor and top-of-the-line hardware from the 35A BLHeli_32 3-6S ESC powered by four F4 processors! This LUX HD AIO G4 comes in a standard 25x25 mounting pattern, weighing just under 13g. The solderless design has plugs installed for your motors, XT30 connection, and more… which gives you the choice to solder or just plug in and fly. Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD AIO G4 Flight Controller!\u003c\/p\u003e\u003cp\u003eNote: This AIO works with both the DJI O3 and other Digital FPV Systems. Plug-n-play, no soldering required. This AIO is also Analog compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolderless Version (includes motor plugs + pre-soldered XT30 power cable)\u003c\/li\u003e\n\u003cli\u003eLow resistance Mosfet with Metal case, up to 6s 35A supported\u003c\/li\u003e\n\u003cli\u003eAnalog current sensor3~6S Lipo (12.6~25.2V) Input\u003c\/li\u003e\n\u003cli\u003e35A BLHeli_32 ESC (F4 processors)\u003c\/li\u003e\n\u003cli\u003e16M Flash Memory Blackbox\u003c\/li\u003e\n\u003cli\u003e25x25mm Mounting Pattern\u003c\/li\u003e\n\u003cli\u003eOSD (Analog \/ Digital)\u003c\/li\u003e\n\u003cli\u003eG473 Flight Controller\u003c\/li\u003e\n\u003cli\u003eICM42688 Gyro\u003c\/li\u003e\n\u003cli\u003eDJI Ready\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMCU: STM32G473 \/ 170Mhz \/ 512KB Flash\u003c\/li\u003e\n\u003cli\u003eBEC: 2x BEC, 5V and 10V, 2.5A each\u003c\/li\u003e\n\u003cli\u003eVBAT Input: 8-32V, 3-6S Lipo\u003c\/li\u003e\n\u003cli\u003eBlackbox: 16MB (128M Bit)\u003c\/li\u003e\n\u003cli\u003eMOSFET: Low resistance\u003c\/li\u003e\n\u003cli\u003eAmperage: 35A up to 6S\u003c\/li\u003e\n\u003cli\u003eESC MCU: F4 BLHeli_32\u003c\/li\u003e\n\u003cli\u003eCurrent sensor: Analog\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x38mm\u003c\/li\u003e\n\u003cli\u003eDJI Digital Port: Yes\u003c\/li\u003e\n\u003cli\u003eGyro: ICM42688\u003c\/li\u003e\n\u003cli\u003ePMW Output: 4\u003c\/li\u003e\n\u003cli\u003eWeight: 12.83g\u003c\/li\u003e\n\u003cli\u003eLED: WS2812b\u003c\/li\u003e\n\u003cli\u003eFC MCU: G473\u003c\/li\u003e\n\u003cli\u003eBeepers: Yes\u003c\/li\u003e\n\u003cli\u003eOSD: Yes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":50813592207645,"sku":null,"price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/4013\/1357\/files\/Lumenier_LUX_HD_AIO_G4_FC_35A_BLHeli_32_3-6S_ESC-1.webp?v=1767866162"},{"product_id":"lumenier-elite-pro-100a-v21-6-12s-4-in-1-am32-esc-30x30","title":"Lumenier ELITE PRO 100A V2.1 6-12S 4-in-1 AM32 ESC - 30x30","description":"\u003cp\u003eThe Lumenier ELITE PRO 100A V2.1 6-12S 4-in-1 AM32 ESC is a powerful ESC with the latest AM32 + telemetry and current sensor capable of 100A constant current and up to 12S (52V) input. The CNC aluminum heatsink provides excellent cooling required for high-power setups often required for cinelifters. The 4-in-1 design simplifies the installation, allowing for 4x ESCs all on one board with a simple plug-and-play cable to connect to your flight controller and AM32 passthrough for easy programming and firmware updates. If you're looking for maximum power and performance for your drone or aircraft, this is the ESC for you.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMake sure to check out our other ESCs and our Lumenier product selection!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizes High-Voltage, Low-Resistance MOSFETs\u003c\/li\u003e\n\u003cli\u003eEquipped with a Cortex M4 32-bit Processor\u003c\/li\u003e\n\u003cli\u003eSupports High Demag Compensation\u003c\/li\u003e\n\u003cli\u003eDshot300, Dshot600, Dshot1200\u003c\/li\u003e\n\u003cli\u003eSupports PWM frequencies\u003c\/li\u003e\n\u003cli\u003eRobust 16V 2A BEC circuit\u003c\/li\u003e\n\u003cli\u003eImproved Heatsink Design\u003c\/li\u003e\n\u003cli\u003e12S high-voltage support\u003c\/li\u003e\n\u003cli\u003eDual Mounting Patterns\u003c\/li\u003e\n\u003cli\u003eBidirectional + Dshot\u003c\/li\u003e\n\u003cli\u003eRobust PCB Design\u003c\/li\u003e\n\u003cli\u003eMOSFET Design\u003c\/li\u003e\n\u003cli\u003eAM32 Firmware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1285\/4651\/files\/Lumenier-ELITE-PRO-100A-Manual_5.jpg?v=1739558414\" alt=\"Lumenier ELITE PRO 100A V2.1 6-12S 4-in-1 AM32 ESC - 30x30\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHIGH PERFORMANCE CUSTOM HEATSINK\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe custom heatsink design provides improved heat dissipation making this ESC a perfect choice for high power needs found in Cinelifters, large drones, and high-performance racing drones. The heatsink effectively cools the ESC allowing for reliable operation even in challenging environments.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong id=\"CD81J0L\"\u003eAM32 FIRMWARE AND LIVE TELEMETRY\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Lumenier ELITE PRO 100A V2.1 ESC is a 32-bit ESC running the latest generation AM32 firmware. The 32-bit architecture enables the ESC to run at incredible speeds, resulting in better performance, faster input signals, and lower latency than older 8-bit ESCs. This ESC also features a live telemetry connection for more advanced flight controllers, as well as a top-of-the-line current sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHEAVY DUTY COPPER TRACES\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOne of the biggest features of this ESC is the heavy-duty copper traces (8oz) which can support extreme current. Additionally, the ESC PCB is 2mm thick and layered on a 2nd PCB of 1mm for a total of 3mm. More copper along with the included aluminum heatsink allows you to push more power to your drone.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBENEFITS OF AM32 FIRMWARE ON 32-BIT ESC\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e32-bit processors run faster than 8-bit, at which we can expect better performance from the new 32-bit ESCs. Faster input signals with lower latency and higher update rate would be possible, such as Dshot1200 or even faster protocols!\u003c\/p\u003e\n\u003cp\u003eThe 32-bit platform also allows more functionality and features that simply weren't possible on 8bit ESCs, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved direction change in the Bidirectional mode\u003c\/li\u003e\n\u003cli\u003eAuto-timing for higher efficiency and reliability\u003c\/li\u003e\n\u003cli\u003eConfiguring from FC using DShot commands\u003c\/li\u003e\n\u003cli\u003eAdjustable “Brake on Stop” force\u003c\/li\u003e\n\u003cli\u003eProgrammable PWM frequency\u003c\/li\u003e\n\u003cli\u003eVoltage\/Current limiting\u003c\/li\u003e\n\u003cli\u003eRGB LED control\u003c\/li\u003e\n\u003cli\u003eESC Telemetry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupports: Dshot300, Dshot600, Dshot1200, MultiShot, OneShot, and normal PPM 1-2us.\u003c\/li\u003e\n\u003cli\u003eMounting Patterns: 30.5x30.5m \/ 86x66mm\u003c\/li\u003e\n\u003cli\u003eProcessors: Cortex M4 32-Bit 120Hz\u003c\/li\u003e\n\u003cli\u003e16V BEC onboard to power flight controller\u003c\/li\u003e\n\u003cli\u003eDimensions: 98mmx72mmx15mm\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 100A x4 ch\u003c\/li\u003e\n\u003cli\u003ePeak Current: 120A x4 ch\u003c\/li\u003e\n\u003cli\u003eSupports: PWM 8-48kHz\u003c\/li\u003e\n\u003cli\u003eMosfet: 100V, 1.5mΩ\u003c\/li\u003e\n\u003cli\u003eFirmware: AM32\u003c\/li\u003e\n\u003cli\u003eVoltage: 6-12S\u003c\/li\u003e\n\u003cli\u003eWeight: 113g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLinks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDownload the latest AM32 Configurator \u003ca rel=\"noopener\" title=\"AM32\" href=\"https:\/\/am32.ca\/downloads\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDownload the User Manual \u003ca rel=\"noopener\" title=\"Manual\" href=\"https:\/\/getfpv-media.s3.amazonaws.com\/wysiwyg\/files\/Lumenier-ELITE-PRO-100A-Manual-V2-web.pdf\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eIncludes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Lumenier ELITE PRO 100A V2.1 6-12S 4-in-1 AM32 ESC - 30x30\u003c\/li\u003e\n\u003cli\u003e2x 10AWG 200°C Wire - Black \/ Red 160mm\u003c\/li\u003e\n\u003cli\u003e2x 8pin JST Breakout Cable (long 120mm)\u003c\/li\u003e\n\u003cli\u003e2x 8pin JST Breakout Cable (short 70mm)\u003c\/li\u003e\n\u003cli\u003e5x M3 Rubber Grommets\u003c\/li\u003e\n\u003cli\u003e1x 63V 1800uF Capacitor\u003c\/li\u003e\n\u003cli\u003e1x Hardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUMENIER","offers":[{"title":"Default Title","offer_id":50813600629021,"sku":"SS-202609SID711","price":515.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/4013\/1357\/files\/lumenier-elite-pro-100a-v2-1-6-12s-4-in-1-am32-esc-30x30-esc-1157042376.jpg?v=1767866495"},{"product_id":"lumenier-qav-r-2c-5-inch-frame-kit","title":"Lumenier QAV-R 2C 5 inch Frame Kit","description":"\u003cp\u003e\u003cstrong\u003eAbout this product\u003c\/strong\u003e\u003cbr\u003e Introducing the Lumenier QAV-R 2C 5″ Frame Kit, crafted with silky, crafted with silky, clear-coated carbon fiber and features an extended main body, offering ample space for accessories and electronics. It also includes versatile mounting options, accommodating both 30.5×30.5mm and 20x20mm hole patterns in the middle and rear of the frame.\u003c\/p\u003e\u003cp\u003eThe QAV-R 2C is built with reinforced, thick carbon fiber to support its larger body size. The 5mm thick arms, a 2.5mm bottom plate, and a 2mm X-brace combine to deliver 10.5mm of carbon at the central stress points, ensuring superior durability and rigidity.\u003c\/p\u003e\u003cp\u003eDesigned for top-mounting the LiPo battery, the frame includes a silicone non-slip battery pad to keep the LiPo securely in place during flights or crashes. Socket cap washers are also included to protect the bottom screw heads, preventing damage that could render them unusable.\u003c\/p\u003e\u003cp\u003eWith 28mm spacing between the top and bottom plates, the QAV-R 2C is compatible with full-size FPV cameras, making it a durable and versatile choice for FPV pilots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e Versatile 20.5×20.5 \/ 30.5×30.5 Stack Mounting\u003cbr\u003e Carbon Fiber Camera Sidewalls\u003cbr\u003e Silicone Non-Slip Battery Pad\u003cbr\u003e Reinforced Bottom X-Brace\u003cbr\u003e Premium 3K Carbon Fiber\u003cbr\u003e Squashed-X Configuration\u003cbr\u003e Black Oxide Steel Screws\u003cbr\u003e Removable 5mm Arms\u003cbr\u003e Easy-Grip Spacers\u003cbr\u003e Motor Guards\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e Motor to Motor Dimensions: Diagonal 220mm, length 132mm, Width 176mm\u003cbr\u003e Stack Mounting: 20mm (M2) \u0026amp; 30mm (M3)\u003cbr\u003e Name: Lumenier QAV-R 2C Frame Kit – 5″\u003cbr\u003e VTX Mounting: 20×20 \u0026amp; 30.5×30.5\u003cbr\u003e Bottom to Top Thickness: 28mm\u003cbr\u003e Dimensions: 165mm * 208mm\u003cbr\u003e Battery Pad: Silicone Non-Slip\u003cbr\u003e Material: Carbon Fiber\u003cbr\u003e Structure: Squashed X\u003cbr\u003e Bottom Plate: 2.5mm\u003cbr\u003e Arm Thickness: 5mm\u003cbr\u003e Carbon Material: 3K\u003cbr\u003e Wheelbase: 127mm\u003cbr\u003e Prop Size: 5 inches\u003cbr\u003e Motor Guards: Yes\u003cbr\u003e Top Plate: 2mm\u003cbr\u003e Weight: 158g\u003c\/p\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":50861562724637,"sku":"SS-202607SID673","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/4013\/1357\/files\/lumenier-qav-r-2c-quadcopter-frame-5-_image-1__1.webp?v=1768900428"},{"product_id":"lumenier-qav-s-2-johnnyfpv-se-5-inch-frame-kit","title":"Lumenier QAV-S 2 JohnnyFPV SE 5 inch Frame Kit","description":"\u003cp\u003eIntroducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience. This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use. The arms can effortlessly fold with only one screw per side. The frame’s aluminum FPV camera protection ensures superior camera support, with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization. With 6mm thick arms, the QAV-S 2 7″ frame achieves an unparalleled balance of durability and weight at 182g (frame only).\u003c\/p\u003e\u003cp\u003eCapture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame – where innovation meets performance!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade in Collaboration with expert FPV pilot JohnnyFPV\u003c\/li\u003e\n\u003cli\u003eFrame made of High-Quality Lumenier components\u003c\/li\u003e\n\u003cli\u003eAdjustable Aluminum XT60 and Accessory Mount\u003c\/li\u003e\n\u003cli\u003eBackward-compatible mounting patterns\u003c\/li\u003e\n\u003cli\u003eAluminum FPV Camera Protection\u003c\/li\u003e\n\u003cli\u003eBalanced Durability and Weight\u003c\/li\u003e\n\u003cli\u003eInjection-Molded GoPro Mount\u003c\/li\u003e\n\u003cli\u003eO3 Compatible Mounting\u003c\/li\u003e\n\u003cli\u003eX-Lock Arm Retention\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBALANCED DURABILITY AND WEIGHT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe QAV-S 2 JohnnyFPV Edition builds on the durability of its predecessor with upgraded 6mm thick arms in addition to the aluminum X-lock and FPV camera protection. At 133g (frame only – without accessories) this combination provides an industry-leading balance of weight and durability for even the most demanding applications.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/lq9lw9O2s0.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i2.532cK69IK69ISF\"\u003e\u003cstrong\u003eX-LOCK ARM RETENTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i2.532cK69IK69ISF\"\u003eThe QAV-S 2 introduces a new lateral X-Lock arm system. This all-aluminum arm locking system improves the QAV-S design in both rigidity and ease of use, providing two-axis clamping that is mechanically isolated from the main plates and flight controller stack. The new lock system also allows the arms to fold with only one screw per side for easy transportation.\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i2.532cK69IK69ISF\"\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/JCGu61FRqD.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALUMINUM FPV CAMERA PROTECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe new FPV camera mounting solution offers excellent camera protection and support for various cameras through customizable carbon plates. The frame includes plates with damped mounts tested and optimized for the O3 camera and plates with mounts for a range of other camera options. If you want to create your own, the M2 mount points on the aluminum guards easily allow for custom mounts. Your imagination is the limit!\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/Mglc68qXHA.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eINJECTION MOLDED GOPRO MOUNT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe QAV-S 2 uses the same GoPro mount pattern used by other Lumenier frames, allowing a durable injection molded GoPro mount to attach with a single screw.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/Gu1DFC3Tnk.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i7.532cK69IK69ISF\"\u003eBACKWARD-COMPATIBLE MOUNTING PATTERNS\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i6.532cK69IK69ISF\"\u003eFor those who still want to use printed GoPro and antenna mounts, the QAV-S 2 brings the JohnnyFPV frame into line with the mount patterns from the other QAV-S series frames. The new edition now uses the same mounting pattern and standoff placement as the other frames in the series. All previous QAV-S* mounts and Bardwell Special Edition frames will fit the JohnnyFPV Edition without modification.\u003c\/p\u003e\u003cp\u003e*Original QAV-S JohnnyFPV Special Edition mounts are no longer compatible\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/jZC5FrSDXS.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i8.532cK69IK69ISF\"\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i9.532cK69IK69ISF\"\u003eO3 COMPATIBLE MOUNTING\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe rear plate adds 25.5 M1.6 mount holes to mount the O3 air unit to the frame directly. The frame kit also includes a 5mm full aluminum mounting kit to allow for perfect wire routing for both the O3 air unit and a rear XT60 connector.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/f5M1OqakQJ.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i11.532cK69IK69ISF\"\u003eADJUSTABLE ALUMINUM XT60 AND ACCESSORY MOUNT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA custom rear mounting solution allows for a hard mounted XT60 connection as well as a range of accessory mounting options for antennas, GPS, and rear-facing action cameras. Adjustable angles allows for the perfect position regardless of the accessory being used. The frame kit includes plates for the injection molded GoPro mount and GPS mounts with both single and dual antenna options, as well as a single antenna only option.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/migratify.assets.thebetterapps.com\/uploads\/gowindcreate.myshopify.com\/kccPOTWi3g.png\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i14.532cK69IK69ISF\"\u003eFOLDING ARMS\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i12.532cK69IK69ISF\"\u003eThe new lock system on the QAV-S 2 JohnnyFPV SE allows the arms to fold with only one screw per side. Simply remove the side screws and wedges, and you are now able to fold the arms.\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i12.532cK69IK69ISF\"\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade in Collaboration with expert FPV pilot JohnnyFPV\u003c\/p\u003e\u003cp\u003eFrame made of High-Quality Lumenier components\u003c\/p\u003e\u003cp\u003eAdjustable Aluminum XT60 and Accessory Mount\u003c\/p\u003e\u003cp\u003eBackward-compatible mounting patterns\u003c\/p\u003e\u003cp data-spm-anchor-id=\"a2g0o.detail.1000023.i13.532cK69IK69ISF\"\u003eAluminum FPV Camera Protection\u003c\/p\u003e\u003cp\u003eBalanced Durability and Weight\u003c\/p\u003e\u003cp\u003eInjection-Molded GoPro Mount\u003c\/p\u003e\u003cp\u003eDeadCat Arm Configuration\u003c\/p\u003e\u003cp\u003eO3 Compatible Mounting\u003c\/p\u003e\u003cp\u003eX-Lock Arm Retention\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRear Stack Dimensions: 20×20 (potentially 30×30 with adapter)\u003c\/p\u003e\u003cp\u003eCustom Parts: 6061 Aluminum (Bronze Gold)\u003c\/p\u003e\u003cp\u003eStandoffs: 7075 Aluminum (Bronze Gold)\u003c\/p\u003e\u003cp\u003eScrews: Black Zinc Steel 12.9 grade\u003c\/p\u003e\u003cp\u003eWeight: 133g (without accessories)\u003c\/p\u003e\u003cp\u003eMiddle Stack Dimensions: 30×30\u003c\/p\u003e\u003cp\u003eArm: 6mm 3K Carbon Fiber\u003c\/p\u003e\u003cp\u003eFrame Size: 220mm\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003ci\u003e\u003cu\u003eIMPORTANT NOTES\u003c\/u\u003e\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePACKAGE INCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLumenier QAV-S 2 JohnnyFPV SE 5” Frame Kit\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right\u003c\/p\u003e\u003cp\u003e2x JohnnyFPV QAV-S 2 Camera Plate for Grommets\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 20mm Camera Plate Right\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 20mm Camera Plate Left\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear Base Mount Right\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Aluminum Guard Right\u003c\/p\u003e\u003cp\u003e1x 14 Gauge Silicon Wire (Pair, Red and Black)\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Rear Base Mount Left\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Aluminum Guard Left\u003c\/p\u003e\u003cp\u003e2x JohnnyFPV QAV-S 2 6mm Arm Wedge\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Split Plate Front\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Split Plate Rear\u003c\/p\u003e\u003cp\u003e1x Lumenier QAV-PRO Gopro Mount\u003c\/p\u003e\u003cp\u003e4x JohnnyFPV QAV-S 2 5 Inch Arm\u003c\/p\u003e\u003cp\u003e2x 5mm O3 Air Unit Mount 20mm\u003c\/p\u003e\u003cp\u003e1x JohnnyFPV QAV-S 2 Top Plate\u003c\/p\u003e\u003cp\u003e2x Heatshrink 5mm Diameter\u003c\/p\u003e\u003cp\u003e2x Lumenier Battery Strap\u003c\/p\u003e\u003cp\u003e4x Knurled Standoff\u003c\/p\u003e\u003cp\u003e1x XT60E-M (Black)\u003c\/p\u003e\u003cp\u003e1x Hardware Set\u003c\/p\u003e\u003cp\u003e4x Foam Pads\u003c\/p\u003e","brand":"Lumenier","offers":[{"title":"Default Title","offer_id":50861596672285,"sku":null,"price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/4013\/1357\/files\/lumenier-qav-s-2-johnnyfpv-se-5.jpg?v=1768901412"}],"url":"https:\/\/soarskyrc.com\/collections\/lumenier.oembed","provider":"SoarSky","version":"1.0","type":"link"}